Skip to content
Blog

How to Find a Leak in Your Pipes with Expert Pipe Leak Detection!

Determining Excess Water Usage
Home | Blog | How to Find a Leak in Your Pipes with Expert Pipe Leak Detection!

Dealing with a pipe leak can be a stressful and costly experience for any home or business owner. Water damage, mould growth, and the risk of structural damage are just a few of the potential consequences of a leak going undetected for any length of time. But fear not! With the right tools and a little know-how, you can quickly identify and fix a leak in your pipes before it causes further damage.

In this article, we’ll take you through the steps involved in finding a leak in your pipes, from identifying the signs of a leak to using advanced technology for expert pipe leak detection.

Step 1: Identify the Signs of a Leak

One of the most important steps of pipe leak detection is knowing the signs to look for. Here are some common indicators of a pipe leak:

  • Unexplained water bill increases: If your water bills are higher than usual, it could be a sign that you have a hidden leak wasting water.
  • Reduced water pressure: If you notice a drop in the water pressure in your shower or sinks, it could be due to a leaking or ruptured pipe restricting water flow to various fixtures or throughout the whole property.
  • Sounds of dripping or running water: If you hear water dripping or running sounds coming from behind walls, in the ceiling or under the floor, there’s likely a leak.
  • Water spots or stains: Look for water spots or stains, or signs of mould growth on ceilings, walls, floors, or on the sides or internals of vanities. These can be signs of a slow-dripping leak damaging your property.
  • Warped or buckled flooring: If your flooring is warped or buckled, it could be due to water damage caused by a hidden pipe leak.
  • Puddles in your yard: Wet patches and muddy puddles in your yard on dry, sunny days can indicate an underground pipe leak. 

Step 2: Isolate the Area

Once you’ve identified the signs of a leak, it’s time to isolate the area where the leak is occurring. This will help you narrow down the search and make it easier to find the source of the problem. Here are some tips for isolating the area:

  • Turn off the main water supply: Shut off the main water supply to your home to prevent further water damage and check if the numbers on your metre continue to climb.
  • Follow water damage: If any specific rooms or areas have higher levels of water damage or mildew, this indicates where the leak is.
  • Check individual fixtures: Inspect each fixture and appliance individually to see if they’re leaking or if there’s a difference in water pressure.
  • Check pipes and fittings: Inspect pipes and fittings where possible for signs of wear and tear or corrosion.

Step 3: Use Professional Pipe Leak Detection

If you’ve isolated the area but not the exact pipe, it’s time to call in the experts. Professional pipe leak detection companies will have specialised technology, tools and techniques to check for and locate leaks quickly.

At LeakTech, our expert leak detectors are experienced in using the following technology to find leaks quickly and without excavation or damaging your property:

  • Thermal Imaging: Thermal Imaging technology uses infrared cameras to detect heat signatures in pipes. Leaks often cause hotspots in pipes due to increased friction and frictional heat generation.
  • CCTV In-Pipe Camera: If we detect a leak, we can use a CCTV in-pipe camera to check for signs of damage and blockages to locate the exact cause of the leak.

Step 4: Fix the Leak

Once you’ve detected the source and location of the leak using one of these technologies, it’s time to fix it. Again, this is a job best left to the professionals. You can call an experienced plumbing company to come out and repair or replace the broken pipes that are causing the leak.

Protect Your Property From Water Damage With Pipe Leak Detection

Finding a leak in your pipes can be a stressful and challenging task, but with the right tools and knowledge, you can quickly identify and fix the problem before it causes further damage. By following these steps – identifying signs of a leak, isolating the area, using technology to detect leaks, and locating and fixing the leak – you’ll be able to keep your pipes in good condition and avoid costly repairs down the line.

For more information on how to find leaks in your pipes, contact LeakTech today. Our team of experts has years of experience in pipe leak detection and we’re here to help you protect your plumbing system and property.

Contact to LeakTech

Contact us to find your leak or underground services – quickly and accurately

Whether you’re dealing with a water leak, gas leak, or underground service in your residential, commercial, or civil property, our local leak detection experts can help.

Contact us today on 1300 053 257 or fill in the form below.

Brisbane Map

Brisbane

Sunshine Coast Map

Sunshine Coast

Name(Required)
What type of services are you looking for (if known)